Set Up ai cast on Windows

This page was machine-translated. The Japanese page is the official version.

Before continuing, complete the standard device setup procedure through Step 2, Generate the configuration file.

Install rpiboot

1. Download the rpiboot installer.

2. Double-click the installer to run it.

3. Click Next >.

   

4. Accept the license and click I Agree.

   

5. Select the installation location and click Install.

   

6. When installation is complete, click Next >.

   

7. Click Next >.

   

8. Click Finish to complete the installation.

   

Make ai cast visible to the PC

1. Move the BOOT switch on the side of ai cast toward the triangle.

   

2. Connect the USB-A port on the back of ai cast to the PC with a USB cable.

3. Connect the ai cast power cable to the device.

4. Search for rpiboot-cm4-cm5 and launch rpiboot-CM4-CM5.

   

5. The procedure is complete when the PC recognizes ai cast as an external drive.

   

Write the OS image

1. Follow Step 3, Write the OS image to an SD card, in the standard device setup procedure. Select ai cast, which is shown as an external drive by rpiboot, as the target.

2. After completing Step 4, Copy the configuration file, safely eject the drive and disconnect the power and USB cables from ai cast.

3. Move the BOOT switch on the side of ai cast away from the triangle, then turn the device on again.

   

4. When setup is complete, ai cast appears as a new device on the Actcast device list page.